I can see when a file is finished recording (reached 30mins) it then transfers it to the E drive/HDD. I'm not even sure why the activity is showing on the C drive but I've monitored it using crystaldisk and it's getting absolutely hammered with writes - I can't find any temp folder or where it's writing to. Given the C drive is flash based, it is not going to last long with the constant writes before consuming the specced TBW. 5mbps constant write, in addition to the usual OS drive overheads equates to over 400gb of writes per day - going to a drive that isn't even storing the footage. However - there is a constant 5 mb per second write to the C drive that does not occur when the client is closed, or recording is disabled. Reolink client installed on the C drive (SSD) Windows 2019, Dell T5810 - 10 core Xeon, 64GB DDR4 ECC RAM, M.2 SSD to host the OS & programs, 18TB HDD for footage. Please refer to the below steps to install the SD card on your camera.I'm running 2x 4k & 1x 1080p ReoLink cameras on my home server. Try to keep the left lens level with the right lens.You may power on the camera indoors for a few Powered on, the camera will produce heat. The camera may work in extremely cold conditions as low as -25☌.Do not install the camera at places where rain and snow can hit the lens directly.However, it doesn't mean the camera can work underwater. With IP waterproof ratings, the camera can work properly under conditions like rain and.Make sure the power ports are not directly exposed to water or moisture and not blocked.To ensure better image quality, it’s recommended to clean the lens with a soft cloth from. To ensure the best image quality, the lighting condition for both theĬamera and the captured object shall be the same.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |